91-100 Spoilboard Surfacing Cutters
Product Details Listed Below
Designed for surfacing MDF, particleboard and balsa core where “flow through” or “high flow” fixturing is employed using large capacity vacuum pumps. This method of surfacing spoilboards allows for much faster table planing.
Usage: Aluminum, plastics and composite wood
Material: Hard plastic, Soft plastic, Aluminum, MDF
STRAIGHT
| Part Number | Cutting Dia. | Shank Dia. | Shank Length | # of Flutes |
| 91-000 | 1-1/4 | 1/2 | 1-1/2 | 2 |
| 91-102 | 2-1/2 | 1/2 | 2 | 2 |
| 91-106 | 4 | 3/4 | 2-1/4 | 3 |
Note: 90-002, 90-004, 90-006 & 90-008 use 91-125 insert and 91-130 screw
90-014 use 91-127 insert and 91-130 screw
UP-SHEAR
| Part Number | Cutting Dia. | Shank Dia. | Shank Length | # of Flutes |
| 91-104 | 2-1/2 | 1/2 | 2 | 2 |
| 91-108 | 4 | 3/4 | 2-1/4 | 3 |
| 91-112 | 2-1/2 | 1/2 | 2 | 3 |
| 91-114 | 4 | 3/4 | 2-1/4 | 3 |
| Part Number | Description |
| 91-125 | Insert 10/pk |
| 91-127 | Radius Insert 10/pk |
| 91-130 | Screw M4 (Old Version) |
| 91-133 | Screw M5 |
| 91-136 | Wrench (T20) |
These tools are dynamically balanced and approved for use on CNC routers. Max RPM 18,000 1/8” Depth of cut MAX.
* DOC = Maximum Depth of Cut Proper running speed for
• 2-1/2”diameter tools should be fed at 200-600 IPM at 12,000-16,000 RPM.
• 4”diameter tools should be fed at 200-600 IPM at 12,000-14,000 RPM.
* Do Not Exceed 1/8” Depth Per Pass